Printable View
hiii friends
does anybody know how to do communication between two PCs using serial port and also using USB port.
please tell me how can i write code with the help of Qt.
It will be better if anybody can provide me with a sample example code.
I am using Qt 3.3.0 in Red Hat-9 Linux
Qt by itself won't help you much here. You need to set up a connection between both machines using some serial protocol (SLIP/CLIP/PPP?).
but i just want to send and recieve simple data through usb. and for that i dont think i need any protocol.
cant i write just a simple program in Qt say one for server and one for client and then connect the two pcs through their usb and then start the data transfer?.....actually i dont know anything about data transfer through either usb or serial port.
can u please help how to do make a correct and systematic approach ? if not usb then atleast can Qt help with serial communication??
Of course you need a protocol. The protocol has to at least specify "who talks now", "who listens now", "how fast we talk" and "what language we use to talk".Quote:
Originally Posted by shamik
Yes, if the system will create device nodes for those usb/serial devices. You can then open "/dev/sttySomething" and read from it/write to it.Quote:
cant i write just a simple program in Qt say one for server and one for client and then connect the two pcs through their usb and then start the data transfer?
A correct approach is to setup a communication channel through a device driver (meaning Qt can't help, as already mentioned).Quote:
can u please help how to do make a correct and systematic approach ?
USB is also serial, so everything applies :)Quote:
if not usb then atleast can Qt help with serial communication??
can u tell me how to setup a protocol??Quote:
Originally Posted by wysota
how to do it. ??Quote:
A correct approach is to setup a communication channel through a device driver (meaning Qt can't help, as already mentioned).
fine.
if not Qt then i m sure i can do it using c++ alone. I have done some research and have come to know that using a structure called termios defined in termios.h fine we can communicate through usb and serial port. i.e. we can open, close, read and write through the port. but i dont know how to do it.
can anybody please help??
No, you can't if your system doesn't have support for serial communication enabled. You'll still have to do it no matter what. And when you do it, you won't need any other "special tricks". When using plain serial everything should be already set up, so you'd just need to set proper device options using ioctl (like the speed of the device) and then you can simply open a proper ttyS device and communicate with it as I already mentioned in the previous post. For USB you still need to configure the device to reveal its serial ports (they should be called /dev/ttyUSB0, /dev/ttyUSB1, etc.) and find a proper one to communicate with (especially if you have other USB devices plugged in).Quote:
Originally Posted by shamik
This is true if you already configured the connection between two machines. If you did, you can forget about termios and simply open the device and use it.Quote:
I have done some research and have come to know that using a structure called termios defined in termios.h fine we can communicate through usb and serial port. i.e. we can open, close, read and write through the port.
You still have to set the connection between two ends of communication. And if you want a two-way transmission, you'll have to use SOME protocol - either an existing one or your own one. If you don't know what carrier collisions are, I'd suggest you go with an existing one (the easiest one would be PPP as it would give you an IP interface between machines, so you could use IP protocols like TCP or UDP).Quote:
but i dont know how to do it.
can anybody please help??
You can start here: http://tldp.org/HOWTO/Serial-HOWTO.html#toc1
As for Qt support, see here: http://qextserialport.sourceforge.net, it should be enough for you if you don't use USB. If you do, you'll still need to make sure your kernel reveals USB serial ports.
Anyway, what exactly do you need the connection for? Do you want to transfer files or some application data?