Opened file serialCapture.txt
requestStarted: request type setHost rx : id = 1 (id = 1)
requestFinished: request setHost rx : id = 1, ID = 1, error = No error
requestStarted: request type setSocket rx : id = 3 (id = 3)
requestFinished: request setSocket rx : id = 3, ID = 3, error = No error
requestStarted: request type GET rx connect : id = 4 (id = 4)
stateChanged: request type GET rx connect : id = 4 Id=4 is changed to Sending
stateChanged: ---reading state---
stateChanged: request type GET rx connect : id = 4 Id=4 is changed to Reading
readResponseHeader: code = 204 for Id = 4
stateChanged: request type GET rx connect : id = 4 Id=4 is changed to Connected
requestFinished: request GET rx connect : id = 4, ID = 4, error = No error
done: No Error.
******I start sending my canned serial data here (which comes as HTTP continuation of data packets)**************
stateChanged: ---reading state---
stateChanged: request type Id=0 is changed to Reading
readData: has read 1 packets of 51 bytes
readData: has read 5 packets of 3807 bytes
Closing stream capture file
readData: has read 9 packets of 7524 bytes
readData: has read 13 packets of 11256 bytes
readData: has read 17 packets of 14990 bytes
readData: has read 21 packets of 16868 bytes
******The device starts sending serial data here(which comes as HTTP continuation of data packets)**************
stateChanged: request type Id=0 is changed to Closing
stateChanged: request type Id=0 is changed to Unconnected
*****At this point the TCP connection is closed by QHttp. Arg!********
Bookmarks