QT3 application is not running on ARM Board

[yogeshgokul]

Sometimes our app size+required dlls size goes beyond the mem capacity of boards, so this could be the issue, that your app is not even starting. And qt examples are running because the are relatively smaller in size. Better try to run a small test app on arm board, before running actual app.

[soumya]

The application from qt examples with ui.h files running fine in the target.

But the size of the example application we tried is 61k but our application size is 122k.
(we are having 64MB flash and 64MB RAM on board).

Is this giving any problem?

Is there any other way to check this problem?

Best regards,
soumya

[yogeshgokul]

Means memory is not an issue with you.

[yogeshgokul]

You better try a test app, on board. Then see results.

[soumya]

I created test application with just 3 pushbutton and 3 lineedits (with ui files) and its
working fine in the target so the problem is only with our application right?.

Any other ways to try out????

[yogeshgokul]

First of all, you stated in first post, about green blank screen. Why green only.

Is your application uses additional qt module or 3rd party module. In form of DLLs. What all qt dlls you are deploying with your application.

[nish]

are you using some hardcoded values for your windows sizes?

[soumya]

By default for all the applications green screen comes up first and then the application.

we have loaded only libqte.so.3.3.7 to the target.

we have not hardcoded any values to our window size

[yogeshgokul]

By default for all the applications green screen comes up first and then the application.

The green screen is coming and there is no error message.
Does it means, your app is running and its not fitting in small screen? Try to put a message box in starting of your app. e.g. in main().

Try to showMaximised your first window. It works most of the times for small screens. Your env vars are fine, and qt lib is also fine, the deployment is fine, thats why u can run test apps. So I guess you are very close.

[soumya]

I am using vga not a small screen and i have used qDebug message in main.cpp
and i am getting that message in the console.

I have used many forms in my application and i am checking each form individually and i let u know shortly

[yogeshgokul]

I am using vga not a small screen

Thats cool.

and i have used qDebug message in main.cpp
and i am getting that message in the console.

Thats a good news.

I have used many forms in my application and i am checking each form individually and i let u know shortly

Good Luck

[soumya]

Hello,

I am checking my application part by part.

I am doing something like this

case Key_Enter: // Mapped with Enter Key
{

qDebug( "Key Press Event: Enter" );
enterpushButton->setFocus();
if ( TRUE == XSet )
{
XSet = FALSE;
input = xlineEdit->text().toDouble();

if ( input >= 0 && input < 99999.999){
XVal = ((input * 1000) / (1000));
qDebug ( "XVal : %5.3lf",XVal);
xlineEdit->setText(QString::number( XVal, 'f', decimals_mm ) );
}

else if(input > 9999.999){
xlineEdit->setText(" OVERFLOW ");
}
else if(input < 0 && input >= -99999.999){
xlineEdit->setMaxLength(10);
XVal = ((input * 1000) / (1000));
qDebug ( "XVal : %5.3lf",XVal);
xlineEdit->setText(QString::number( XVal, 'f', decimals_mm ) );
}
else if(input > -99999.999){
xlineEdit->setText("OVERFLOW ");
}


}

}
This code works fine in the host .

But in the target when i press enter key if entered digits is more than 5 it should display "OVERFLOW" and it works fine in the target ..
But if entered digits is less than 5 it should display double value of what i entered but
gui hangs but i get the double value(qDebug) in the console .


I strace the same finally i got this,

write(2, "Key Press Event\n", 16Key Press Event
) = 16
write(2, "Key Press Event: Enter\n", 23Key Press Event: Enter
) = 23
ioctl(4, FIONREAD, [0]) = 0
write(5, "\0", 1) = 1
ioctl(4, FIONREAD, [1]) = 0
ioctl(4, FIONREAD, [1]) = 0
write(2, "XVal : 789.000\n", 15XVal : 789.000
) = 15
old_mmap(NULL, 626950144, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = -1 ENOMEM (Cannot allocate memory)
brk(0) = 0x52000
brk(0x25639000) = 0x52000
old_mmap(NULL, 626950144, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = -1 ENOMEM (Cannot allocate memory)
old_mmap(NULL, 2097152, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x40a19000
munmap(0x40a19000, 946176) = 0
munmap(0x40c00000, 102400) = 0
mprotect(0x40b00000, 32768, PROT_READ|PROT_WRITE) = 0
old_mmap(NULL, 626950144, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = -1 ENOMEM (Cannot allocate memory)
mprotect(0x40b08000, 8192, PROT_READ|PROT_WRITE) = 0
mprotect(0x40b0a000, 16384, PROT_READ|PROT_WRITE) = 0
mprotect(0x40b0e000, 32768, PROT_READ|PROT_WRITE) = 0
mprotect(0x40b16000, 65536, PROT_READ|PROT_WRITE) = 0
[4] + Stopped strace ./debug -qws


Best regards,
soumya