painter problem in new Qt-4.2.3 installation

[impeteperry]

Hi all

I just installed Kubuntu to 7.04 on two of my computers. On both I downloaded Qt from A Trolltech mirror.

All went fine, no errors or messages on installation

I have 2 programs that use "QPaintEvent". Both work fine on another computer running the same Qt version. Now one program runs fine on the new installations, the othe locks up the computer and forces a re-boot on both of the new installations.

This works fine on all computers

void BaseForm::paintEvent(QPaintEvent  * )
{
	QStringList temp;
	QString k;
 
	int xs, xe, ys, ye;
	int W, H, w, h;
	int width, height;
	int counter;
	QPainter p( this );
	QPen pen;
	QFont f;
 
	if(addressList.count() == 0) return;
	f.setFamily("MuktiNarrow");
	f.setPointSize(10);
	p.setFont(f);
	pen.setBrush(Qt::black);
	p.setPen(pen);
	W = ui.frmLabelBoxes->width();
	H = ui.frmLabelBoxes->height();
 
	width = ((W-20)-30)/3;
	height = (H - 115)/10;
	counter = 0;
	for(h = 0; h < 10; ++h)
	{
		for(w = 0; w < 3; ++w)
		{
 
			k = addressList[counter++];
			if(counter > addressList.count()-1) return;
			xs = 35 + w * (10 + width);
			ys = 30 + h * (10 + height);
			xe = width;
			ye = height;
			p.drawRect(xs, ys, xe, ye );	
			p.fillRect(xs+1, ys+1, xe-1, ye-1, Qt::white);
			k = addressList[counter++];	
			temp = k.split("\n");
			count = temp.count();
			for(n = 0; n < count; ++n)
				p.drawText(xs + 10, ys + 15 * (n + 1) , temp[n]);
		}	
	}

void BaseForm::paintEvent(QPaintEvent  * )
{
	QStringList temp;
	QString k;

	int xs, xe, ys, ye;
	int W, H, w, h;
	int width, height;
	int counter;
	QPainter p( this );
	QPen pen;
	QFont f;

	if(addressList.count() == 0) return;
	f.setFamily("MuktiNarrow");
	f.setPointSize(10);
	p.setFont(f);
	pen.setBrush(Qt::black);
	p.setPen(pen);
	W = ui.frmLabelBoxes->width();
	H = ui.frmLabelBoxes->height();

	width = ((W-20)-30)/3;
	height = (H - 115)/10;
	counter = 0;
	for(h = 0; h < 10; ++h)
	{
		for(w = 0; w < 3; ++w)
		{

			k = addressList[counter++];
			if(counter > addressList.count()-1) return;
			xs = 35 + w * (10 + width);
			ys = 30 + h * (10 + height);
			xe = width;
			ye = height;
			p.drawRect(xs, ys, xe, ye );	
			p.fillRect(xs+1, ys+1, xe-1, ye-1, Qt::white);
			k = addressList[counter++];	
			temp = k.split("\n");
			count = temp.count();
			for(n = 0; n < count; ++n)
				p.drawText(xs + 10, ys + 15 * (n + 1) , temp[n]);
		}	
	}

To copy to clipboard, switch view to plain text mode 

And this llocks up on the "drawLine" and the "drawText" commands (they are optioned out here)

void dlgMain::paintEvent(QPaintEvent  * /*event*/)
{
	QString k, h;
	double angle;
	int n, xs, xe, ys, ye, xc, yc;
	bool ok;
	QPainter p( this );
	QPen pen;
	QFont f;
 
	if(paintSupportLines.count () > 0)
	{
		f.setFamily("Courier");
		f.setPointSize(dwgScaleFactor);
		p.setFont(f);
		pen.setBrush(Qt::blue);
		p.setPen(pen);
		p.setViewport(viewportRect);
		p.setWindow(windowRect);
 
		if(clearWindow == "erase") 
		{ 
			p.eraseRect(windowRect); 
			clearWindow = "cancel erase"; 
		}
		else
		{	
			for( n = 0; n < paintSupportLines.count(); ++n )
			{	
				p.setClipRect(clippingRect);
				k = paintSupportLines[n];
				temp = k.split( "," );
 
				xs = temp[0].toInt(&ok);
				ys = temp[1].toInt(&ok);
				xe = temp[2].toInt(&ok);
				ye = temp[3].toInt(&ok);
				//p.drawLine(  xs, ys, xe, ye );
							// start of labeling.
				if(temp[4] == "true")
				{
					p.setClipRect(windowRect);
					xc = (xs + xe) / 2;
					yc = (ys + ye) / 2;
					if( xs == xe ) angle = pi/2;
					else if( ys == ye) angle = 0;
					else angle = atan((double)(ye-ys)/(xe-xs));
					angle = (angle * 180)/pi;
					p.save();
					p.translate( xc, yc );
					p.rotate( angle );
					p.scale(1, -1);
					k = "S" + h.setNum(n + 1);
				     //p.drawText(0, 0, k);
					p.restore();
				}
			}
		}

void dlgMain::paintEvent(QPaintEvent  * /*event*/)
{
	QString k, h;
	double angle;
	int n, xs, xe, ys, ye, xc, yc;
	bool ok;
	QPainter p( this );
	QPen pen;
	QFont f;
	
	if(paintSupportLines.count () > 0)
	{
		f.setFamily("Courier");
		f.setPointSize(dwgScaleFactor);
		p.setFont(f);
		pen.setBrush(Qt::blue);
		p.setPen(pen);
		p.setViewport(viewportRect);
		p.setWindow(windowRect);
		
		if(clearWindow == "erase") 
		{ 
			p.eraseRect(windowRect); 
			clearWindow = "cancel erase"; 
		}
		else
		{	
			for( n = 0; n < paintSupportLines.count(); ++n )
			{	
				p.setClipRect(clippingRect);
				k = paintSupportLines[n];
				temp = k.split( "," );

				xs = temp[0].toInt(&ok);
				ys = temp[1].toInt(&ok);
				xe = temp[2].toInt(&ok);
				ye = temp[3].toInt(&ok);
				//p.drawLine(  xs, ys, xe, ye );
							// start of labeling.
				if(temp[4] == "true")
				{
					p.setClipRect(windowRect);
					xc = (xs + xe) / 2;
					yc = (ys + ye) / 2;
					if( xs == xe ) angle = pi/2;
					else if( ys == ye) angle = 0;
					else angle = atan((double)(ye-ys)/(xe-xs));
					angle = (angle * 180)/pi;
					p.save();
					p.translate( xc, yc );
					p.rotate( angle );
					p.scale(1, -1);
					k = "S" + h.setNum(n + 1);
				     //p.drawText(0, 0, k);
					p.restore();
				}
			}
		}

To copy to clipboard, switch view to plain text mode 

I have varified that the data is correct.
I am at a loss and really need some help.
Thanks

[marcel]

How large is the paintSupportLines list?

[impeteperry]

How large is the paintSupportLines list?

anywhere from 1 to maybe a hundredw

I just changed the "drawLine" to "drawRect" and it worked I got a whole lot of boxes instead of lines. Strange What?